Is how you cut thick pieces of steel and other metals. One of the top 10 best plasma cutters in 2021 uses plasma to make those cuts you would normally not get with other cutting tools.
These top of the line plasma cutters can use up to 40,000 degrees F heat to make sharp and very accurate cuts That are a tool that you want working for you when you have tough metal cuts to make. Go with the best to make sure you get your cutting jobs done right.
Also read: Best Smart Home Theater Projectors
List Of Top 10 Best Plasma Cutters in 2021
10. Goplus Plasma Cutters
Once you get this plasma cutter going your heavy metal cutting tasks will seem like you are using a hot knife to cut through butter. Measuring 18 by 11 by 13 inches in size, you need 220 volts to get the power to the cutter.
After you get this plasma cutter enough power it can cut through 12mm thick steel or other metal with ease. Inside the box, you will find a welding mask to protect you as you work. Also, you get an earth clamp, cutting torch, and a brush. Everything you need is included in your purchase.
In addition to all of that, you get an instruction manual to help guide your operation of this powerful plasma cutter.
9. Thermal Dynamics 1-5631-1 Cutmaster
Cut up 3/4 inch thick steel when you employ this plasma cutter to help you work. Once you get the unit powered up you have all the energy you need to make sharp accurate cuts.
Then with the digital display and 2 adjustment knobs, you can find the power level you need at the moment. The large display makes all symbols and numbers readable and understandable. If you want power, you will get it when you use this plasma cutter.
Also to reach your cutting job area, you can use the 3 built-in handles or stretch the 50-foot cable on the cutting torch to make your jobs simpler to do. Power and convenience are the names of the game with this high-quality tool.
8. Everlast PowerPro Pulse Welder 40a Plasma Cutters
One good thing about this plasma cutter is that it comes with an inverter design. This style of cutter helps you cut down on your energy consumption as you work. To protect the control panel and digital display, there is a clear plastic shield that flips up when you need to make power adjustments.
A digital readout on the control panel makes reading the numbers nice and easy. Then when you need to make a change 5 dials and 4 buttons bring you the power you need when you need it.
For best results when using this device, you will need a generator that puts out about 10,000 watts continuously. This plasma cutter makes fine cuts as well as welds two pieces of metal together for a great fit.
7. PRIMEWELD CUT60 Torch Plasma Cutters
Get professional results when you turn to this top-rated plasma cutter to handle your tough metal cuts. Not only do you get a digital readout but you get an air pressure gauge to make sure everything is at the right combination for accurate work.
4 rubber feet help keep the plasma cutter still while you work. They also make sure your cutter is stable so your cuts do not get messed up. After you set the controls and power up, you should have a continuous arc that lets you cut rusted painted metal objects without trouble.
All the dials, connections, and controls you need are conveniently located on the front of the plasma cutter. Then the built-in handle makes transporting this tool easy to do.
6. Hypertherm Powermax 85 Hand System
With a 25 foot lead, you should be able to reach any metal object that needs your cutting attention while keeping you safe. Once you have this plasma cutter ready to go, you can get up to 85 amps to help you make those accurate cuts.
On top of that, the two dials on the control panel let you adjust the power to fit your needs. Then the display screen keeps you informed of your settings. Double-checking where you are at is not difficult as the numbers are displayed clearly.
Also, you should be able to cut up to 1-inch thick metal with no hassle. The power in this plasma cutter is second to none.
5. PRIMEWELD Pilot Arc 50A Plasma Cutter
The four rubber feet keep this plasma cutter nice and stable. You can concentrate on your work without worrying that the cutter will move at the wrong moment. On top of that, you get a built-in handle to transport this plasma cutter to where you need it.
In addition to those features, a flick of the switch turns this plasma cutter into a heavy-duty welder. All the controls you need are located in an easily accessible location with a digital display to help you monitor your settings.
Once you are ready to go and the machine is up and working, you should be able to cut thick pieces of metal at a drop of a hat. The plasma cutter measures 18 by 14 by 11 inches. It is a small machine that puts out lots of power.
4. Hypertherm Powermax45 XP Hand System
When it comes to power tools, size does not matter. What matters is the performance and power output. This smaller plasma cutter has the power output and can perform to the levels of its larger counterparts.
After you get this cutter secured to its power source, you should be able to cut up to 5/8 inch thick pieces of metal like they were cardboard. With its smart sensor technology built-in, your air pressure should always be at optimum levels.
On top of that, the automatic gas adjustment makes sure this plasma cutter is simple to operate. A 20-foot cutting torch makes reaching your pieces of metal not that difficult to do. Its voltage rating is 200 to 240 allowing you to use this powerful tool in many different countries around the world.
3. Hypertherm Powermax30 XP Building America Edition Hand Plasma System
You can be patriotic when you cut your pieces of metal down to size. Once you get ready to work, you can use a variety of power sources from 110 to 240 volts. If you need them, adapters are included with your purchase.
Also, this handheld model comes with its own handle or you can use the shoulder strap to get to your job location. Plus, your purchase also includes protective eye and hand gear. Safety has to be first all the time especially with plasma cutters.
One dial makes all the adjustments you need and you should be able to adjust your settings as you go. A comfortable handgrip makes sure your hand can endure the hours you work cutting metal.
2. Miller Spectrum 625 X-treme Plasma Cutter
When you have a big cutting job to take care of, big plasma cutters are not always the tool for the job. This 40 amp plasma cutter handles big jobs even though its stature is small in size. It can cut 5/8 inch mild steel without breaking a sweat.
In addition to that, you get 2 adapters with your purchase. These tools allow you to work with a variety of voltage levels without having to buy a new plasma cutter. With handy controls on the front, you can select your settings with ease.
The speed of this cutter is top-rated and very quick. You may need to make adjustments to your working style in order to keep up with it.
1. Vipercut 30amp Plasma Cutter
Put 30 amps of power to good use. This powerful plasma cutter uses those 30 amps to make sure your thick metal pieces are cut faster and cleaner than ever before. The simple to use controls make sure you can direct that power to your cutting task.
Plus, you get a comfortable cutting torch with a long cable. The design of both makes sure your hands are comfortable as you work and so you can reach those difficult pieces with ease. Your cutting job should be faster as well as easier to do with this plasma cutter on duty.
In addition to all of that, a built-in regulator helps monitor the plasma cutter and should help keep you safe when you work.
When you have tough, thick steel or other metals to cut, you want a top of the line plasma cutter by your side. These top 10 best plasma cutters in 2021 have the power and cutting ability you want.
With these top-quality plasma cutters, your work should fly by and seem like a walk in the park. On top of that, you get sharp, clean, and accurate cuts just about every time you use them.
Read more: Best Drawing Tablets